2025 Faresin Industries Leader PF1 Full Electric 1.11

2025 Faresin Industries Leader PF1 Full Electric 1.11

Leader PF Full Electric is designed to make use of the electricity that farms produce in large quantities through photovoltaic or cogeneration plants, and at extremely low cost. At the same time, the machine produces no pollutant emissions, thus reducing the environmental impact of the farm. The use of electrical technology also promotes animal welfare and enables certification of the production chain.

The performance of the new Leader PF FULL ELECTRIC was the starting point of the project. In fact, Faresin engineers have worked hard to ensure performance quite similar to their respective heat-powered models, while maintaining enough range to complete at least a full day on an average-sized farm. For this reason, the 91 kWh Lithium – Iron – Phosphate (LiFePO4 or LFP) battery integrated with Farmatics telematics for remote control was installed in the rear engine compartment.

Features may include:

Battery charging is done with complete flexibility thanks to the Universal Charge system, a single plug-in interface for 220V single-phase and 400V three-phase supplies. The machine also has a system that recovers energy during braking and accelerator release by storing it in the battery and increasing its range.

• Battery 91.3 kWh

• Up to 4 mixed

• Charging times from 2 - 4 hours

The characteristic geometry of the mixing tub, combined with the special profile of the auger, makes it possible to quickly prepare homogeneous mixes while respecting the organoleptic properties of the fiber. The electric motor, connected to the robust planetary gearbox, guarantees the right power necessary for all types of mixtures thanks to the 8 mixing speeds, which allow you to adapt the machine’s performance to the recipe.

• Precise and even cut

• Cleaning function of the auger

• Up to two electrically operated exhaust doors

• Accuracy and consistency with electronic weighing and batching system

• Integrated NIR on the tub to constantly monitor the unifeed

• Electrically driven counterknives

• Unloading door opening with hydraulic drive

Tractive force comes from a 51 kW electric motor located in the rear axle, which, via a cardan shaft also transmits motion to the front axle. The system has two mechanical gears with shifting from standstill: 1st= 0 – 6.2 mph and 2nd= 0 – 18.6 mph.

• 4-wheel drive and steering allowing three types of steering (concentric, crab steering and front-only).

• Hydropneumatic suspension adjustable in height via a control in the cab

The integrated electronic management controls the distribution of power to the various organs, which is dosed as needed to the various utilities, so as not to overload the battery, motors, and inverters, significantly reducing consumption.

In addition, the entire system is monitored by diagnostics that affect all electrical, electronic, and hydraulic parts, including the control instrumentation in the cabin.

Unlike some electrified solutions without silage available on the market, Faresin has decided to equip the new Leader PF Full Electric with a powerful cutter with a width of 2000 mm driven by an electric motor, to allow the autonomous loading of the various components of the recipe.