2024 Barko Industrial Wheeled Tractors - Tier 3 937

MoreLess
Limited Time Offer!

Selling Price -$15,000.00

2024 Barko Industrial Wheeled Tractors - Tier 3 937

Equipped with a comfortable operator cab and delivering high hydraulic horsepower to mulching heads and other attachments, the Barko 937 industrial wheeled tractor offers industry-leading performance at an overall lower cost of ownership.

Features may include:

Engine
  • The 937 is powered by a 365-HP Cummins QSL8.9 Tier 3 diesel engine. The unit includes a high-capacity anti-clog radiator with auto reversing fan.
Load Sensing Hydraulics
  • Unlike open loop systems that waste fuel, Barko's load sensing hydraulic system automatically adjusts attachment performance according to the load, resulting in greater productivity and higher efficiency.
Hydraulics / Attachment Drive
  • With pressure ratings up to 5,500 psi, a high-flow hydraulic pump delivers far more horsepower to the attachment than competitive machines. High capacity oil cooler and variable displacement piston pumps keep hydraulic oil cool to maximize service life. A high-pressure 20 micron return filter helps prevent debris from damaging pumps and valves.
Travel System
  • A hydrostatic transmission with two-speed transfer case allows for controlled operation speeds and travel speeds up to 13.0 mph (20.9 km/h).
Articulation Joint
  • A unique 45-degree articulation joint withstands extreme stress and tough terrain, while the machine's overall maneuverable design allows for work in tight spaces.
High Strength Construction
  • Weld blending and engineered sweeping curves provide added strength and increased fatigue resistance.
Bolt-On Cylinder Glands
  • High-strength hydraulic cylinders with bolt-on glands combine maximum durability with easy serviceability on-site.
Cover Plates
  • Cover plates, guards and seals help prevent debris from getting into the machine.
Centralized Lubrication
  • Routine maintenance is simplified by a centralized lubrication station that provides one access point for greasing steering cylinders and axles.
Service Access
  • Tractor includes lockable and removable side panels, as well as removable side, front and bottom brake, engine and transmission covers.
Operator Cab
  • ROPS and FOPS certified, the tightly sealed, vibration-isolated floating cab features sound insulation and an adjustable bucket seat with 4-point harness. Climate controlled with air conditioning and heating with defroster, the cab includes dual joystick controls, pilot operated foot travel and brake pedals, and various control buttons.
Visibility
  • The 937 offers tinted Lexan glass on all windows. An air knife system keeps the front windshield clear of debris. A total of 9 mounted cab lights provide enhanced visibility around the machine.
Fuel Tank
  • 126-gallon (477 L) fuel tank capacity allows for longer operating intervals.
  • 2024
  • Barko
  • Industrial Wheeled Tractors - Tier 3
  • 937
  • Other
  • QSL8.9
  • 365 HP (272 kW)
  • Cummins
  • Tier III
  • 2,100 RPM
  • Oil Cooler: High capacity, anti-clog type with reversing fan integrated with radiator and charge air cooler
  • Axles - Front / Rear: Hydraulic
  • Hydrostatic; variable displacement pump and motor with pilot operated foot controls, combined with two-speed transfer case
  • Joystick controlled
  • Service/Emergency Brake: Hydrostatic-dynamic front axle internal wet disc brake with foot pedal in cab
  • Switch operated control on dash with wet disc brakes, located on drive line at transmission
  • Standard (8' 11" machine width) 28L–26 20 ply
  • 25 x 26 reinforced wheels standard
  • 160 amp
  • Starting System: 12-volt with ignition key
  • Travel: 0-5.0 MPH (0-8.0 km/h) low gear / 0-13.0 MPH (0-20.9 km/h) high gear
  • Lift/Tilt/Steer: Variable displacement, load sensing piston | Travel / Attachment Drive: Variable displacement piston
  • Lift/Tilt/Steer: Producing 41 GPM (155 LPM) @ 3,600 psi (24,821 kPa) | Travel: Producing 58 GPM (220 LPM) @ 5,000 PSI (34,474 kPa) | Attachment Drive: Producing 106 GPM (401 LPM) @ 5,500 PSI (37,921 kPa)
  • Attachment Drive Return Filter: High pressure 20 micron | Articulation: 45°
  • Maximum Pin: 8' 6" (259 cm)
  • 22" (558 mm)
  • 9' (274 cm)
  • Without Attachment: 20' 6" (625 cm)
  • 8' 11" (272 cm)
  • 10' 8.5" (326 cm)
  • 15' 9" (480 cm) outside tires (increases with larger tires)
  • 126 gal. (477 L)
  • Reservoir: 87 gal. (329 L)
  • Total Operating: 30,000 lbs (13,608 kg) without attachment
  • Axles - Type: All wheel drive planetary axles / Front: Rigid / Rear: Oscillation | Power View Display: Engine oil pressure, engine RPM, engine load %, hour meter, engine temperature, volt meter | Audio/Visual Warning System: Engine oil pressure, engine temperature | Analog Audio/Visual Warning System: Hydraulic oil temperature, low hydraulic oil level, park brake, differential lock engaged, high pressure filter service, attachment pump filter service, fuel level
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $15,000.00
  • Edinburg, Texas
  • New
  • test 5
  • 2024
  • Barko
  • Industrial Wheeled Tractors - Tier 3 937
  • QSL8.9
  • Hydrostatic; variable displacement pump and motor with pilot operated foot controls, combined with two-speed transfer case
  • Available
Advertised pricing excludes applicable taxes title and licensing and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.